Posts: 2
Threads: 1
Joined: Feb 2015
Reputation:
0
Hello forum I have a Nautilis NE 2000 elliptical and the other day I noticed that when I go on the machine I pushed down on the pedal and it seem like I the more weight I put on the pedal something was slipping. I am still able to use the unit but it seems the more pressure I push down as if something was slipping what could that be, Thanks for any assistance offered on this issue.
Posts: 177
Threads: 6
Joined: Jan 2014
Reputation:
5
Where the crank arm connects to the main stair arm...there is a little cover on each side. Remove the cover and tighten down the nut on the screw. It may be broken. This is a common problem with these machines. That part is no longer available. Let me know if you get it figured out.
Fitness Equipment Repair Southern CA See our website!
Posts: 2
Threads: 1
Joined: Feb 2015
Reputation:
0
Sorry I just got around to be able to check this out but those screw seem to be tight it almost seems like thee pressure on the pedal cause the belt to slip it seems, could the belt be worn or lose
Posts: 177
Threads: 6
Joined: Jan 2014
Reputation:
5
04-20-2015, 04:52 AM
(This post was last modified: 04-20-2015, 04:54 AM by atpands.)
If the bolt is tight, then yes, most likely a loose or worn drive belt. It would feel like it was slipping.
I believe that belt can be tightened so you maybe able to try this without ordering parts. Make sure to tighten both sides equally.
Fitness Equipment Repair Southern CA See our website!
