08-08-2014, 05:19 PM
I'm looking for a drive belt for an older Cybex treadmill Q20ci. I can't find any and they are no longer made. Suggestions?
|
Thread Rating:
Cybex Q20ci treadmill drive belt needed
|
Do you know the length and the number of ribs?
If not...try contacting cybex because I know they have dealers who take up their old parts
888GOCYBEX. Let me know.
If not...try contacting cybex because I know they have dealers who take up their old parts
888GOCYBEX. Let me know.
Fitness Equipment Repair Southern CA See our website!
08-09-2014, 07:19 AM
(08-09-2014, 02:27 AM)atpands Wrote: Do you know the length and the number of ribs?
If not...try contacting cybex because I know they have dealers who take up their old parts
888GOCYBEX. Let me know.
there are 10 ribs, the belt is 15/16 inches wide and on the pulleys measures about 8 1/2 inches long
08-10-2014, 04:02 AM
What happened to the old drive belt? Can you locate any markings on the belt like 360J10 where 10 means the number of ribs. I am still looking for you but not a lot of info out there for this machine.
Fitness Equipment Repair Southern CA See our website!
08-10-2014, 08:02 AM
(08-10-2014, 04:02 AM)atpands Wrote: What happened to the old drive belt? Can you locate any markings on the belt like 360J10 where 10 means the number of ribs. I am still looking for you but not a lot of info out there for this machine.
the old drive belt is still on there is a number 70461 on the outside of the belt and separately there is the letters LH on another part of the belt. The cybex catalog # is 7001296 no longer available and i've tried other sites to no avail
08-11-2014, 01:04 AM
Okay. Let me see what I can find for you.
Fitness Equipment Repair Southern CA See our website!
08-11-2014, 01:23 PM
Coming up empty on that one. Even Cybex can't give me any info. They stopped supporting it in 2004. You've said the belt has 10 ribs. Now we need the length. If it is still on the machine, the best way is going to be taping a string to one end and running it around the length of the belt until it comes around to the other side. Then mark it somehow and measure that length an ten we should be able to find something close based on that measurement. Let me know what you find. It should be about 1 1/2 -2 feet long. Try to get that measurement as close as you can.
Fitness Equipment Repair Southern CA See our website!
03-27-2015, 02:06 PM
It is going on a year later but I might be able to help you. I have a belt for that machine I can give you the numbers from it. just respond and I will get back to you. if you have a choke for that machine maybe we can make a trade.
jim
jim
Browsing: 1 Guest(s)